Close Up of Arrow



You can use any kind of arrow graphics that
you want. Just find a graphic and sandwich
it between the two pieces of lucite. It is
very important to use 3/32 inch thick lucite
so that the arrow panels and the non-arrow
panels end up being the same height.

This arrow panel consists of from top to bottom :

Clear Lucite
Arrow Graphics
Clear Lucite with Sheet Metal glued to underside
Weatherstripping and Foam Core
Sheet Metal on Peg Board
MDF rails for support

The arrow panel sits underneath the brackets. You
will have to drill holes through the lucite and
peg board and into the MDF rails. Make sure that
the bracket screws do not touch the 9 1/2 inch
sheet metal contacts, or it could cause a short.

More pictures of the arrows